Recycling plastic

Making Frames to embroidery

For the manufacture of frames I needed cover on the box-tortnitsy, linen twine and glue gun. Before you start work, the surface tortnitsy treated with alcohol, trying to remove all stains.

She will be part of the bottom of the window box of the future framework for the rest of the protrusion from the end to fill out the string.

Clay nanoshu so that the turns of the twine were glued together, not only between themselves but also glued to the base.

Putting the turns, trying to put a strip of hot glue small areas, because as the air it quickly solidifies.

Having laid coils of twine to the end of the box, cut off excess.

For substrate, I chose a light foundation – interlining.

Otcherchivayu shape blanks, frames and cut out the circle.

For design work, I picked this one sample of embroidery, which I spent about a year. At the time I got embroidery machine and tried to sew some designs, it was interesting what happens. Prepared samples I put in a daddy, and now they are waiting in the wings. We assume that today are lucky that’s the picture.

Ready to put on the circle of nonwoven embroidery, combining the centers of both of them. Cut off excess and prokleivayu on the edges of both fabrics.

Harvesting frames combined with embroidery and prokleivayu around in several places. If the excess tissue will be performing outside the frames, then they must be cut immediately.

Once again prokleivayu edge, slightly pulling vyshivkuOtmechayu the place where the frame will be a loop. I continue to lay the coils of twine, carefully turn inside out, not forgetting to do and very petelku.Vid from the inside of my pictures. Fleece is better still to duplicate and cardboard

That’s what I did. You can of course leave, and in this version, but you can dream up. I added a butterfly with a napkin, which are pre-pasted by PVA on the fabric and cut, and then landed on the frame.

source: img0.liveinternet.ru Visit link →