Someone can not stand in the house remains, scraps, boxes. Someone can easily find them for domestic use. And not only so, but with a twist.
Tight shoe box.
Tinting formulations for paint
Glue for ceiling tiles or all-purpose adhesive
Prototype knife, wood stapler, putty miter box.
1 - Prepare a mixture of primers for the surface box: Mix in any capacity, 2 / 4 parts filler, 1 / 4 of PVA glue and 1 / 4 of latex paint. Thoroughly mix the composition, add color to paint. Cover the composition of the surface of the box inside and out, doing it with a broader brush. How should dry surface at room temperature.
2 - Make another mix – mix 3 / 4 of the filler with 1 / 4 PVA glue. Stir well, add the color of paint the same color. Apply the mixture to the surface with a spatula “herringbone” every time “wiping” a spatula on the surface. Cover the surface composition inside and outside. Good dry surface is very important!
3 - Prepare the exact same composition but a different color. Colors Kolerov select such that the surface after decorating the “game”. Apply by trowel to the surface composition as described in Section 2. How should dry the surface.
4 - In a suitable tank mix PVA glue with silverfish.
5 - Apply the mixture to the surface, toniruya it. This layer is also sure to dry it.
6 - With miter box piled cutting lines with a knife, cut a wide molding on the side so that you could make a frame to the open end of the box. Part of the frame should have a good dock at the corners.
7 - Out of cardboard cut more corners to reinforce corners.
8 - Put it on slices molding universal glue or glue on ceiling tiles. Connect the parts.
9 - Reinforce the corners of frames with staples furniture staples from the back side.
10 - To the corners of the finished frame is not to spread, attach to the back of the corners of a rigid cardboard. Using a universal glue.
11 - Further strengthen corners with staples staples.
12 - Zashpaklyuyte corners of the frame. Allow sealer to dry.
13 - Colour the finished frame stock, which was prepared in Section 3. Apply the composition from all sides, not forgetting the ends of the frame. Dry the first layer.
14 - almost dry brush, apply the first layer composition, which covered the ground. TONE protruding part of the frame, giving it a worn, aged look.
15 - “Silver” composition coat dried surface of the frame. The frame should look “shabby”, repainted several times.
16 - When the surface of the frame dries, apply a universal glue on its inner edge, lay the frame on the edge of the box, put a weight on top. If you do not regret the time and both must be dried each layer, the frame will turn smooth and strong enough.
Visit link →