Tree of paper snowflakes

We will need a sheet of green paper. Although, if you prefer red, or, say a yellow tree, then take a sheet of paper that color. We have to cut the sheet into narrow strips, so for the convenience of pre-razlinuem sheet. You can cut multiple sheets.

Akkurano cut the sheet into narrow strips.

Take the three stripes, and is intertwined with the other three strips. At this stage it is important to weave held in the middle. To strip is not displaced they can fix the place of glue.

At one snowflake (one level fir) will need 24 strips to 12 strips on each half. The photo shows the blank for the three snowflakes (three levels of Christmas trees). Two blanks at one level. Uchitvaya that the Christmas tree should have a cone shape, then the blanks are different lengths – the closer to the top of the shorter.



Merge adjacent strips, as shown in the photo.

Take the two parts of one snowflake. Get to the two parts with equal length beams.

Make sure that the gluing parts obtain a symmetric, otherwise you get a snowflake curve and as a consequence, the curve herringbone.

Superimpose the two halves of each other. Single rays slips into the hole glued beams and also paste them with the joints already glued strips.

You should get here this detail. She is a snowflake. It is part of one level of future Christmas trees.

We perform similar operations and other blooms.

Tree from the bulk of snowflakes

At this stage we have a set of three-dimensional snowflakes. Which can serve as room decoration in and of themselves.
To get Christmas trees, stringing snowflake on a thread as a children’s pyramid.
We will need a sheet of green paper. Although, if you prefer red, or, say a yellow tree, then take a sheet of paper that color. We have to cut the sheet into narrow strips, so for the convenience of pre-razlinuem sheet. You can cut multiple sheets.

Akkurano cut the sheet into narrow strips.

Take the three stripes, and is intertwined with the other three strips. At this stage it is important to weave held in the middle. To strip is not displaced they can fix the place of glue.

At one snowflake (one level fir) will need 24 strips to 12 strips on each half. The photo shows the blank for the three snowflakes (three levels of Christmas trees). Two blanks at one level. Uchitvaya that the Christmas tree should have a cone shape, then the blanks are different lengths – the closer to the top of the shorter.



Merge adjacent strips, as shown in the photo.

Take the two parts of one snowflake. Get to the two parts with equal length beams.

Make sure that the gluing parts obtain a symmetric, otherwise you get a snowflake curve and as a consequence, the curve herringbone.

Superimpose the two halves of each other. Single rays slips into the hole glued beams and also paste them with the joints already glued strips.

You should get here this detail. She is a snowflake. It is part of one level of future Christmas trees.

We perform similar operations and other blooms.

Tree from the bulk of snowflakes

At this stage we have a set of three-dimensional snowflakes. Which can serve as room decoration in and of themselves.
To get Christmas trees, stringing snowflake on a thread as a children’s pyramid.

source: img1.liveinternet.ru Visit link →