I love that these minky and satin loveys are luxurious. A little bit of luxury goes such a long way! And if you make a batch of them the price per lovey is scandalously low–such a nice secret for a luxe baby gift.
To make your own Luxe Lovey you will need:
-1/3 yard each of two coordinating minky fabrics (with 60″ minky you will actually have enough fabric for 6 loveys!)
-1 package Wright’s Satin Blanket Binding (1 package is enough for 3 loveys; buy two packages to make 6 loveys)
LUXE LOVEY TUTORIAL
To start, cut 10″ squares of each of your minky fabrics (1/3 yard of 60″ minky is enough for 10 squares).
Then, round the corners. I much prefer the rounded look and it makes adding the satin ruffle much easier. I used a small tin as a template for the curve on one corner.
You can trace the curve on the wrong side of the fabric and cut, or use a rotary cutter to cut around whatever you are using for a template.
Once you’ve established the curve on one corner use it as the template for the remaining three so all are identical. Repeat this for each minky square you are using.
for the satin ruffle: Take your packaged binding and cut it in thirds. You will have three pieces, each about 58″ in length. Take a length of binding and sew the ends right sides together to form a ring.
Press the seam open and then fold and press the entire length of the satin binding to remove the packaging creases.
With the binding folded in half, as it came, gather along the open edge. Stitch 1/4″ from the edge (aligned with your foot as shown above) using your longest (basting) stitch and with your tension set at the highest (9 on my machine).
I found I didn’t need to pin the binding to do this but since the satin will inevitably creep you can make a small pleat in the top layer occasionally to compensate. It will blend in with the gathering.
Now divide the binding in four, mark with pins, and pin right sides together to the centers of each side of your minky, as shown above.
Pull your thread to adjust the gathers and pin the binding all the way around the edges of your minky. Baste stitch the ruffle in place with a 1/4″ seam allowance.
Now you will take your coordinating piece of minky and pin it right sides together with the ruffled piece, being careful to fold in the satin ruffle so it’s lying flat and clear of the edges. (The satin ruffle is “sandwiched” between your two pieces of minky with edges of the the two minky pieces and satin binding aligned.)
Leave a two inch opening to turn right side out, as shown above between the red and blue pins.
Stitch on top of the basting to avoid having to unpick any basting stitches (which is impossible to do on the satin without pulling up extra threads).
Turn right side out (so cute!) and stitch the opening closed as close to the edge as possible. The minky hides the stitching rather nicely, especially if it is patterned.
And there you have it: your Luxe Lovey!
It’s hard to stop with just one. You’ll want to make them in all sorts of combinations. And why not give away two at a time–it’s great to have a backup of your child’s comfort object as you know what a nightmare it is if it goes missing.
Visit link →